# Recombinant DNA, Cloning and PCR

> Amplification solves scarcity, not identity: cut sites and primers set what can be joined or copied, while readouts and controls test what actually was. This lesson follows that rule through restriction-ligation cloning and PCR, then shows how qPCR estimates starting amount and how gels and Southern, Northern and Western blots read out the result. Afterwards you can plan a cloning experiment, calculate a qPCR fold change and choose the controls that make each result believable.

Course: Genetics and Molecular Biology (Tools and genomes). Level: core university (third year). About 19 minutes.
Lesson page (link this one when citing): https://stemhop.com/lessons/recombinant-dna-and-pcr/

Builds on: Bacterial and Phage Genetics: Conjugation, Transduction and Transformation · DNA Replication: Semiconservative Copying and Its Machinery · DNA Is the Genetic Material

## What you'll learn

- Explain how type II restriction enzymes, DNA ligase and a plasmid vector with an origin and a selectable marker are used to clone a fragment in E. coli, and distinguish selection from blue-white screening.
- Describe PCR cycle by cycle, design a primer pair that faces inward on opposite strands, and calculate the ideal copy number after a given number of cycles while explaining why real reactions plateau.
- Distinguish RT-PCR from real-time quantitative PCR, explain why a lower Ct means more starting template, and calculate a fold change by the delta delta Ct method under its stated assumptions.
- Choose the readout (gel, Southern, Northern or Western blot) and the controls (size ladder, no-template, no-RT, loading control) that a given cloning or PCR result needs.

The first film took one insert from cut ends to a sequenced clone; here is what it skipped.

> **The one idea.** Amplification solves scarcity, not identity: cut sites and primers set what can be joined or copied, while readouts and controls test what actually was.
>
> *Scope:* this lesson’s methods. A restriction site or primer pair can still admit an unintended product, and not every readout establishes sequence. Nor does making more DNA report the starting amount; only [qPCR](https://stemhop.com/methods/pcr/) timing estimates that, under stated assumptions.

## Cut at a known site, then seal the join

Many bacteria fight phages, viruses that inject their DNA into bacterial cells, with a [restriction enzyme](https://stemhop.com/methods/recombinant-dna-cloning/) that cuts unmodified copies of a short recognition sequence and a methylase that marks those sites in their own DNA. Host DNA is usually spared; matching sites in incoming unmarked phage DNA can be cut.

Laboratory **type II restriction enzymes** recognize defined sequences and cut at fixed positions in or near them. Many sites are palindromes of four to eight base pairs: they read the same 5’ to 3’ on both strands. EcoRI, from *E. coli*, recognizes 5’-GAATTC-3’ and cuts each strand between G and A. The cuts sit four bases apart, leaving single-stranded 5’ AATT overhangs that let EcoRI ends pair, so they are called **sticky**, or cohesive. SmaI cuts both strands at the same point in CCCGGG and leaves **blunt ends**.

**Predict.** EcoRI leaves AATT overhangs and BamHI leaves GATC. Will an EcoRI-cut insert pair with a BamHI-cut vector?

> **Check your prediction.** No. “Sticky” means single-stranded, not universally compatible; AATT and GATC do not pair. For enzymes like these, which leave a fixed overhang, the same enzyme on vector and insert gives compatible ends; two enzymes whose ends are distinct and cannot pair, such as EcoRI at one end and BamHI at the other, also fix the insert’s orientation.

*Figure (AI-generated illustration).* Compatible overhangs let DNA pieces pair, and DNA ligase seals the backbone to make the join permanent. Image: a three-step strip. EcoRI cuts a double rail of beads at two points four beads apart, leaving staggered ends. Two such ends from different pieces pair through short single-stranded overhangs. DNA ligase then seals the join into one continuous double rail.

Like matching jigsaw tabs, compatible ends fit but only loosely. **DNA ligase** forms the missing phosphodiester bond between a 3’-OH and a 5’-phosphate on each strand. T4 DNA ligase can also join blunt ends in vitro.

## Into bacteria: retain, screen, confirm

A **plasmid** is a small DNA circle copied separately from the bacterial chromosome (see [bacterial and phage genetics](https://stemhop.com/lessons/bacterial-and-phage-genetics/)). A cloning vector carries an **origin of replication**, without which the plasmid is lost as cells divide; a **selectable marker** such as ampicillin resistance; and a **cloning site** of unique restriction sites.

Bacterial uptake of naked DNA is **transformation**: cold calcium chloride and a brief heat shock, or an electric pulse (**electroporation**), let a fraction of cells take it up. It differs from **transfection** (DNA entry into animal cells) and **oncogenic transformation** (a cell becoming cancer-like).

**Selection** on ampicillin kills plasmid-free cells but spares empty vectors, so **screening** asks which plasmid survived. In blue-white screening, the cloning site lies inside **lacZ-alpha**, a short part of the beta-galactosidase gene from the [lac operon](https://stemhop.com/lessons/lac-operon/). The host makes the rest of the enzyme; together the parts turn colorless X-gal blue. An insert usually disrupts lacZ-alpha, so recombinant colonies stay white, but some white colonies carry no insert.

*Figure (AI-generated illustration).* Blue-white screening changes the odds that a colony carries an insert, but restriction analysis or colony PCR and sequencing must test the construct. Image: two plasmid rings. The left ring has an origin of replication, an ampicillin resistance block and an intact lacZ-alpha block, and gives a blue colony. The right ring has an insert splitting lacZ-alpha and gives a white colony. A small inset shows an ampicillin plate with blue and white colonies.

**Predict.** A colony on the same ampicillin plate is blue. What does it most likely carry?

> **Check your prediction.** A vector that closed up without an insert, leaving lacZ-alpha intact. Pick white colonies, but white is a strong hint, not proof: check each as the first film did.

Expressing the insert needs a promoter and other expression parts (see [hacking the cell](https://stemhop.com/lessons/hacking-the-cell/)).

Before [PCR](https://stemhop.com/methods/pcr/), cloning in bacteria was the usual way to make many copies of a DNA fragment; both routes remain routine. PCR copies DNA in a tube, with no living cell involved; the second film follows one bounded region as it grows.

**Film transcript: Reading a PCR as It Grows**

### Film transcript: Reading a PCR as It Grows

The first film grew DNA inside bacteria. Now two PCR tubes end equally bright. Did they start with the same amount? The answer hides in how the signal grew. Watch a bounded target become a curve that can be read. PCR starts with template DNA, primers, nucleotides, and heat-stable polymerase. A yellow primer binds each grey strand. Their 3' ends point into the target. Polymerase extends from those ends. Primer placement sets the candidate boundaries for amplification. Heating separates template strands. Cooling lets each primer pair with its site. Polymerase extends each primer, building blue DNA along grey template. Repeat the cycle, and earlier products become templates.

Like a photocopier whose copies can be copied, the bounded target branches into a growing family. During ideal early cycles, each completed target can seed another copy. Product can double every cycle, bending the graph upward. The blue curve is computed from starting amount times two raised to cycle number. Real reactions follow this only early. As product accumulates, amplification slows toward a plateau. Different starting amounts can finish at similar levels. Endpoint brightness loses how each reaction arrived there. Real-time PCR preserves that history by measuring fluorescence throughout the run, while early curves remain separated. A green threshold crosses both curves.

One curve reaches it earlier, although both endpoints look alike. Which reaction began with more target? Think about how many rounds each needed to reach the same fluorescence. The earlier crossing came from more starting target. That reaction needed fewer rounds to reach the shared threshold. The crossing is the threshold cycle, written Ct. With matched, near-perfect efficiency, an earlier Ct means more starting template. The plateau cannot support that inference. Real-time quantitative PCR watches DNA accumulate.

Reverse-transcription PCR starts differently. Reverse transcriptase copies RNA into complementary DNA, which PCR can amplify. Combining the steps measures an RNA target. The fluorescence still reports amplified DNA, not RNA directly. A curve is evidence only within a controlled comparison. A tube with no template can expose contamination.

For RNA, a tube without reverse transcriptase can expose genomic DNA. A known positive shows the assay works. Controls turn a glowing curve into an interpretable result. The early rising curve preserves information about starting amount. The endpoint mostly shows that product accumulated. Read the crossing under stated assumptions, then challenge the signal with controls. The useful measurement is when the curve arrives, not how bright it ends.

From the film

- Copy timing estimates input; endpoint abundance does not.
- Opposite-strand primers point their 3' ends into the target.
- Early ideal copying follows N = N0 x 2^n, for n cycles.
- With matched near-perfect efficiency, a lower Ct means more starting template.
- Controls distinguish target signal from contamination, genomic DNA and assay failure.

## PCR: copying one bounded region

[PCR](https://stemhop.com/methods/pcr/) needs a template, two primers, four dNTPs (see [nucleotide metabolism](https://stemhop.com/lessons/nucleotide-metabolism/)) and a DNA polymerase, which adds nucleotides only to the 3’-OH of a primer paired with a template, as in [DNA replication](https://stemhop.com/lessons/dna-replication/). Each cycle has three steps:

1. **Denature** at about 94 to 98 °C to separate the strands.
2. **Anneal** a few degrees below the primers’ melting temperature so each primer pairs with its site.
3. **Extend**, typically at 72 °C for Taq polymerase, which lengthens each primer 5’ to 3’.

Primers are commonly 15 to 30 nucleotides, with matched melting temperatures and no self-pairing or hairpins. Primer-BLAST can check a pair against a sequence database for unintended targets.

**Predict.** After two ideal cycles from one long genomic duplex, are any double-stranded molecules bounded by both primers?

> **Check your prediction.** No. The first copies start at one primer but run past the other site. Exact-length strands appear in cycle 2, paired with longer strands; exact-length duplexes first appear in cycle 3.

After *n* ideal cycles, exact-length duplexes number 2n - 2n per starting genomic duplex. By cycle 30, they are nearly all the product.

*Interactive on the lesson page:* PCR cycle plotter: product against cycle number

**Worked problem (a).** Starting from 10 double-stranded template molecules with perfect doubling every cycle, how many copies are there after 30 cycles?

> N = N0 x (1 + E)n, with E = 1 for perfect doubling

1. Each cycle multiplies by 2, so 30 cycles multiply by 230 = 1,073,741,824.
2. N = 10 x 1,073,741,824 = 10,737,418,240, or about 1.07 x 1010.

Amplification is exponential only early; in one model system, reactions with different starting amounts converged on the same plateau. Making more DNA neither identifies nor quantifies it.

### Counting from when the signal appears

The **threshold cycle, Ct**, from the second film, is the cycle at which fluorescence crosses a set threshold during exponential amplification. **Real-time quantitative PCR (qPCR)** reads fluorescence each cycle with a double-stranded-DNA dye or a sequence-specific probe. **RT-PCR** (reverse-transcription PCR) first copies RNA into complementary DNA (cDNA); **RT-qPCR** combines them to measure mRNA. With matched, near-perfect efficiency and the same threshold, a lower Ct means more starting template; at 100% efficiency, one cycle earlier means twice the starting template.

**Predict.** Target and reference Ct values both move one cycle earlier in a treated sample. Has target abundance changed relative to the reference?

> **Check your prediction.** No. Subtracting reference Ct from target Ct removes the shared shift, so delta Ct is unchanged; relative qPCR asks whether that gap changes between conditions.

**Worked problem (b).** Both reactions are about 100% efficient. Target gene Ct is 24.0 in treated cells and 26.5 in control; reference gene Ct is 18.0 in treated and 18.5 in control.

> fold change = 2−ΔΔCt, where ΔCt = Ct(target) - Ct(reference)

1. ΔCt treated = 24.0 - 18.0 = 6.0.
2. ΔCt control = 26.5 - 18.5 = 8.0.
3. ΔΔCt = 6.0 - 8.0 = -2.0.
4. Fold change = 22 = 4. Target mRNA is about 4-fold higher in treated cells.

The method assumes equal efficiencies near 100% for both assays and a reference gene shown not to change in this experiment.

## Reading the result: size, identity and controls

In an agarose gel, DNA’s negatively charged backbone moves toward the positive electrode, and smaller linear fragments move faster through the mesh. A **size ladder** of known fragments in a neighboring lane turns position into an estimated length. Uncut circular plasmid runs differently from the same plasmid cut into a line. A right-sized band is evidence about size, not identity.

Blots add identity: in Southern’s 1975 method, gel-separated DNA fragments are denatured, transferred to a membrane and paired with a labeled probe. Only complementary fragments light up. A [Northern blot](https://stemhop.com/methods/southern-and-northern-blots/) does the same for RNA. A [Western blot](https://stemhop.com/methods/western-blot/) transfers proteins separated by SDS-PAGE and detects one with an antibody (see [protein purification techniques](https://stemhop.com/lessons/protein-purification-techniques/)).

**Predict.** In an [RT-qPCR](https://stemhop.com/methods/pcr/) run, the no-reverse-transcriptase control crosses the threshold ten cycles after the matched full reaction. Does genomic DNA explain much of the signal?

> **Check your prediction.** Very little. With no cDNA made, that signal comes from DNA already in the RNA. At about equal efficiency, ten cycles later means about 210, or roughly 1,000-fold, less template: about a tenth of a percent of the signal.

Match each control to a failure:

- a **size ladder** calibrates every gel;
- a **no-template control** detects PCR contamination, and a **no-RT control** detects genomic DNA in an RNA preparation;
- a **positive control** shows the assay works, and an inhibitor check such as a spike-in shows that a negative sample means the target was not detected rather than that the reaction failed;
- a **loading control** on a blot, such as a stable-RNA reprobe or total-protein stain, supports comparison within its linear range.

### Design problem

You cut a 5.0 kb vector and a 1.2 kb insert with EcoRI and BamHI, ligate, transform and select on ampicillin. Insert plus vector gives 200 colonies; vector alone with ligase gives 180. Interpret the result and redesign the experiment.

> **One way to do it.** **Interpret.** An EcoRI end (AATT overhang) cannot pair with a BamHI end (GATC overhang), so a vector cut by both enzymes cannot close on itself. Colonies from vector alone mostly come from vector that was cut by only one enzyme, whose matching ends re-ligate, or not cut at all, since uncut plasmid transforms well. Less often, the small piece cut out between the two sites is ligated back in. That background is 180 of 200, so most colonies on the insert plate probably lack the insert.
>
> **Redesign.**
>
> 1. Digest the vector longer or with more enzyme, and check each single digest.
> 2. Gel-purify the cut vector away from uncut circles. When the two sites sit close together, as in a cloning site, singly and doubly cut vector run at almost the same size, so this step alone is not enough.
> 3. Dephosphorylate the vector with alkaline phosphatase. Without 5’-phosphates it cannot re-ligate, while the insert still supplies phosphates for each junction.
> 4. Add controls: cut vector without ligase, to measure carry-over of uncut plasmid (the vector-only ligation above adds singly cut vector that re-closes); and uncut plasmid, to measure transformation efficiency.
> 5. Screen colonies by colony PCR or by EcoRI plus BamHI digest, expecting bands of 5.0 and 1.2 kb, then sequence across both junctions and through the insert.

## Going deeper

### From test-tube joins to copied constructs

In 1972 David Jackson, Robert Symons and Paul Berg joined lambda phage genes and the *E. coli* galactose operon to SV40 DNA entirely in a test tube. That year Janet Mertz and Ronald Davis showed that EcoRI ends are complementary and that a [restriction enzyme](https://stemhop.com/methods/recombinant-dna-cloning/) plus ligase can make hybrid molecules.

In 1973 Stanley Cohen, Annie Chang, Herbert Boyer and Robert Helling joined restriction fragments from separate plasmids, transformed *E. coli* and recovered plasmids with properties of both parents. Berg’s group made recombinant DNA first; the Cohen and Boyer collaboration first showed a recombinant plasmid replicating in a cell.

### Why PCR no longer needs fresh enzyme each cycle

The first published [PCR](https://stemhop.com/methods/pcr/), in 1985, used the Klenow fragment of *E. coli* DNA polymerase I. Heating destroyed it, so fresh enzyme was added every cycle. That Cetus team amplified a short beta-globin region about 220,000-fold.

In 1988 the group reported PCR with polymerase from *Thermus aquaticus*, which survives denaturation. Taq lacks a 3’ to 5’ proofreading exonuclease, so its copies carry more errors. In one 1991 reporter assay, products made with Pfu polymerase carried fewer than a tenth as many mutations. Kary Mullis shared the 1993 Nobel Prize in Chemistry for conceiving PCR.

---

From STEMhop (https://stemhop.com), free lessons by Christopher Deppmann. Lesson text © the authors. Practice questions: https://stemhop.com/lessons/recombinant-dna-and-pcr/
