# Organelles as Distinct Environments

> A eukaryotic cell keeps several chemistries side by side: an acid lysosome, a calcium-rich ER store and an alkaline mitochondrial matrix, all sharing one cytosol near pH 7.2. A membrane is a leaky wall, so the acid, calcium-rich and alkaline gradients here are steady states that last only while energy-dependent transport keeps working against the leak. The lesson uses that idea to predict what bafilomycin, thapsigargin and ionophores do, reads the pH ladder in free protons, and explains why the matrix and stroma, once bacterial cytoplasm, are alkaline while their pumps run. It then weighs the evidence that mitochondria and plastids began as bacteria and assigns a protein to a compartment from fractionation profiles.

Course: Cell Biology (Membranes and compartments). Level: core university (third year). About 22 minutes.
Lesson page (link this one when citing): https://stemhop.com/lessons/organelles-as-environments/

Builds on: Transport Across Membranes · Experiments That Distinguish Mechanisms · Membrane Organization and Topology

## What you'll learn

- Use a pump-and-opposing-flux model to explain acid-lumen pH and the ER calcium store, and predict the scoped effects of bafilomycin, thapsigargin, suitable calibration ionophores and reduced counterion conductance.
- Read the cell's pH ladder, with the system each value comes from, and convert pH differences to free-proton ratios.
- Explain why the mitochondrial matrix and chloroplast stroma are alkaline, and weigh the evidence that both organelles descend from bacteria, including gene transfer to the nucleus.
- Assign a protein to a compartment from fractionation profiles and a latency test, and say what further evidence is needed.

**A lysosome near pH 4.7 and a mitochondrial matrix near pH 8 share one cytosol near pH 7.2, yet differ about 2,000-fold in free protons. What holds each at its own number?**

The first film built the tap-and-hole picture for that puzzle; this text puts numbers on it, tests it with drugs and asks where the outward-facing pumps came from.

> **The one idea to carry through this lesson.** A membrane leaks, so each gradient here (an acid lumen, the ER’s calcium, a respiring matrix, a stroma in the light) lasts only while a pump keeps paying to balance the leak. Stop the pump and the gradient runs down.

## A toy model with numbers

The **lumen** is the space enclosed by an organelle’s membrane; the **cytosol** is the fluid part of the cell outside all organelles. As the first film showed, a lipid bilayer lets ions through only slowly ([membrane transport](https://stemhop.com/lessons/membrane-transport/)).

> **Equation card: Where a lumen's free protons settle if a fixed pump flux is balanced by a leak that grows with the gap.**
>
>     [H+]lumen = [H+]cytosol + push / leak
>
> In words: In this toy model, the lumen's free protons equal the cytosol's, plus the pump's push divided by how leaky the wall is.
>
> - [H+]lumen: free-proton activity, approximated here by an effective molar concentration; pH = −log10 of the activity (effective M)
> - [H+]cytosol: free proton concentration of the cytosol, about 6.3 × 10⁻⁸ M at pH 7.2, held fixed (M)
> - push / leak: the extra free protons the pump holds above the cytosol's; a rate divided by a rate per unit of concentration, so a concentration (M)
>
> Sanity check: No push, or a huge leak: the lumen matches the cytosol. Double the push or halve the leak: the extra free protons double. The model ignores voltage, counterions, other transporters and a pump that slows as its gradient grows: it shows directions, not real pump strengths.
> Try one number Golgi at pH 6.58: [H+] = 10^−6.58 = 2.6 × 10⁻⁷ M. Subtract the cytosol’s 0.6 × 10⁻⁷ M: in the model, push/leak ≈ 2.0 × 10⁻⁷ M.
> Where it comes from optional Step 1 (the assumptions): protons pumped in per second = push, a constant. Protons leaking out per second = leak × ([H+]lumen − [H+]cytosol). Step 2: at steady state, in = out, so push = leak × ([H+]lumen − [H+]cytosol). Step 3: divide by leak and add [H+]cytosol to both sides.

- **A level costs energy for as long as it lasts.** It is a *steady state*: flow in matches flow out, and the pump pays in ATP or electron transport the whole time. An *equilibrium* has no net flow and costs nothing; things drift toward it once the paying stops. No sensor or set point is needed, though cells do regulate pumps, for example by assembling and disassembling the V-ATPase.
- **Different jobs need different levels.** Lysosomal hydrolases such as the protease cathepsin D work best in acid. A calcium store sends a signal only if its calcium is far above the cytosol’s, so that opening a channel releases it ([calcium signalling](https://stemhop.com/lessons/calcium-signaling/)). ATP synthesis needs a proton gradient across the inner mitochondrial membrane ([oxidative phosphorylation](https://stemhop.com/lessons/oxidative-phosphorylation/)).

This is a first, qualitative model of ion gradients; real organelles add membrane voltage, counterions and other transporters. Redox, a level of a different kind, is in Going deeper.

**Predict.** To calibrate a pH reporter (a [fluorescent protein](https://stemhop.com/methods/fluorescent-protein-tagging/) whose signal changes with pH) inside cells, you bathe them in buffers of known pH and add **ionophores**: here, carriers that swap protons for potassium or sodium ions across membranes, which opens a wide path for protons in and out when the bath’s ions match the cell’s inside. Where does the reporter’s compartment settle, and why does that give you a calibration?

> **Check your prediction.** Near the bath’s pH. With a huge leak, push/leak shrinks toward zero, so no pump can hold a gap. Read the reporter at several bath pH values and you have a curve that turns its signal into pH. The clamp needs matched conditions: these ionophores trade protons for potassium or sodium (nigericin plus monensin is one pair used), so the bath is high in potassium like the cell’s inside, and the cells need time to equilibrate.

## The pH ladder

| Compartment | pH | Main proton pump, direction | System |
| --- | --- | --- | --- |
| Mitochondrial matrix | about 7.98 (estimated) | respiratory chain, out of the matrix | HeLa cells, targeted reporter |
| Chloroplast stroma, in light | about 7.8 to 8.0 | photosynthetic chain, out of the stroma | Older plant measurements, reviewed |
| **Cytosol (the line)** | about 7.2 |  | Reference value |
| Nucleus | near 7.2 | none needed: pores pass small ions quickly | Mammalian cells, review |
| ER lumen | near neutral | none named here | HeLa cells, targeted reporter |
| Medial/trans Golgi | 6.58 | V-ATPase, into the lumen | HeLa cells, targeted reporter |
| Early and recycling endosomes | about 6.3 to 6.5 | V-ATPase, into the lumen | Mammalian cells, review |
| Late endosomes | about 5.5 | V-ATPase, into the lumen | Mammalian cells, review |
| Lysosomes | 4.5 to 5.0 | V-ATPase, into the lumen | Mammalian cells, review |

This is the first film’s ladder with the source system for each value; its 4.7 is the middle of the lysosomal range. For calcium, free Ca2+ is about 100 nM in the resting cytosol and about 0.5 to 1 mM in the ER lumen, a 5,000- to 10,000-fold difference; lysosomes hold Ca2+ about 0.5 mM and Cl− 80 to 100 mM (mammalian reviews).

Two traps: not every organelle is acidic, and a small gap in pH hides a large gap in protons.

### Worked problem: reading the ladder in free protons

**How many more free protons are in the Golgi than in the matrix?** A gap of 1.4 pH units looks small; the ratio shows how large it is. Use the two HeLa means, 6.58 and 7.98. They come from separate measurements, not one cell read twice.

> pH = −log10(aH+), where aH+ is the activity of free protons (their effective concentration), so aH+(Golgi) / aH+(matrix) = 10pH matrix − pH Golgi

1. Subtract: 7.98 − 6.58 = 1.40.
2. Raise ten to that power: 101.40 = 25.1.
3. Check, treating activity as concentration: 2.63 × 10−7 M / 1.05 × 10−8 M ≈ 25.

The Golgi lumen has about 25 times the free proton activity of the matrix. This is free activity only; it says nothing about protons held by buffers or how fast protons move. The same arithmetic puts a lysosome at 4.7 about 300 times above the cytosol.

*Interactive on the lesson page:* Compartment pH ratio: how many more free protons?

## Turning the knobs

The first film predicted what bafilomycin A1 does to the **V-ATPase**; here is what it leaves out. The V-ATPase is a rotary pump that spends ATP to move protons from the cytosol into a lumen, and a mammalian review names it the main mechanism keeping endosomes and lysosomes acid. How far a lumen drifts depends on its other fluxes: predict “less acid”, not “exactly 7.2”.

**Charge is part of the push.** Each proton pumped in makes the lumen more positive, and a positive lumen pushes back on the pump. So acidification is thought to need a **counterion**, an ion whose movement cancels that charge: chloride following the protons in, or another cation moving out.

**Predict.** A lysosome loses most of its counterion flow, no other path makes up for it, and its V-ATPase is untouched. Where does its pH settle?

> **Check your prediction.** Less acid, closer to the cytosol line: the charge the pump builds holds it back, so its effective push falls against the same leak. Real lysosomes have several counterion paths, some of them exchangers rather than simple channels, so blocking one need not do this; an experiment must check whether another path took over.

**SERCA**, the sarco/endoplasmic reticulum Ca2+-ATPase, pumps calcium from the cytosol into the ER and builds that 5,000- to 10,000-fold gradient.

**Predict.** After thapsigargin has emptied the ER, a hormone opens the ER’s calcium-release channels. What signal does the cytosol see?

> **Check your prediction.** Little or none from the ER: an empty store has nothing to release. Emptying the store also switches on store-operated calcium entry across the plasma membrane ([calcium signalling](https://stemhop.com/lessons/calcium-signaling/)).

## Same pump, different rungs

The first film left open why one pump family puts the Golgi, endosomes and lysosome on different rungs. That is still studied: the candidates include how many pumps a membrane carries and how they are regulated, how leaky the membrane is to protons, how easily counterions move, and the lumen’s own ionic properties.

**Predict.** In the toy model, could pH readings alone tell you whether the lysosome has more pumps or a tighter wall than the Golgi?

> **Check your prediction.** No. In the model only push/leak sets the level, so a strong pump with a leaky wall and a weak pump with a tight wall give the same pH. You need a second measurement: count the pumps, say, or block them with bafilomycin and time the drift back, which in the model depends on the leak and the lumen’s buffering. Real pumps also slow as their gradient grows (Going deeper).

## Pumps facing out, because they were bacteria

The first film used the simplest picture of the matrix; here is the fuller one. The pH difference across the inner mitochondrial membrane is under one unit, and most of the mitochondrial **proton-motive force**, the pH difference plus the voltage across the membrane, is voltage ([the proton-motive force](https://stemhop.com/lessons/proton-motive-force/)). In chloroplasts, light drives protons from the stroma into the thylakoid lumen, and there too the proton-motive force includes both a pH difference and a voltage ([the light reactions](https://stemhop.com/lessons/light-reactions/)).

The outward direction is a bacterial inheritance: the inner mitochondrial membrane was the bacterium’s plasma membrane. The evidence for that ancestry is strong. Unlike most organelles, mitochondria and plastids have their own DNA and ribosomes, inside two envelope membranes (three or four around some algal plastids).

Molecular sequences tested the idea. Trees of mitochondrial ribosomal RNA placed mitochondrial sequences within the Bacteria rather than with archaea or the eukaryotic cytosol, and later protein data pointed to the Alphaproteobacteria; the exact branch is still debated. Trees built from many proteins supported a cyanobacterial origin for plastids. Who proposed the idea, the closest living relatives and the branch debate are in Going deeper.

Many ancestral mitochondrial genes were lost, and many others moved to the nucleus by endosymbiotic gene transfer. Most mitochondrial proteins are now encoded in the nucleus, made in the cytosol and imported ([protein sorting](https://stemhop.com/lessons/protein-sorting/)); human mitochondrial DNA encodes 13 proteins, of more than a thousand that work in mitochondria. Even the respiratory chain’s outward-facing pumps are built mostly from imported parts. The proteome is a mosaic, with many proteins of origins outside the Alphaproteobacteria.

*Figure (AI-generated illustration).* Mitochondria and plastids keep their own DNA and ribosomes inside two envelope membranes (more around some algal plastids), but much of the ancestral genome was lost or moved to the nucleus, and most mitochondrial proteins are made in the cytosol and imported. The DNA is drawn as a loop for simplicity; some mitochondrial genomes are linear. Image: a cell cut-away with a nucleus and a mitochondrion that has two envelope membranes, its own DNA and ribosomes. An arrow shows much of its genome moved to the nucleus, and another shows proteins made in the cytosol being imported. A small inset shows a plastid with the same features.

Every argument above assumed you knew which compartment a protein sits in. The second film picks up here: how a lab finds out.

**Film transcript: Follow the Markers**

### Film transcript: Follow the Markers

How do you find which compartment holds a protein? Chapter 1 showed how pumps and leaks help compartments keep distinct chemistries. To relate that chemistry to a protein, first find where the protein sits. A fluorescence image can show a protein at the lysosome. But at is not inside. That image alone cannot tell which side of the membrane it is on. So labs also take cells apart. They break cells and separate the pieces by a series of centrifuge spins.

Organelles overlap across these crude fractions; no fraction is assumed pure. To read the fractions, measure markers, proteins whose home is already known. Histone H3 marks the nucleus. Cathepsin D marks the lysosome. Pyruvate kinase marks the cytosol. Each marker spreads across the fractions in its own shape. A protein that stays associated tends to travel with its compartment. So an unknown is assigned provisionally to the marker group whose full profile it most closely shares. In 2016, Georg Borner's group did this with mass spectrometry. They reported localization information for more than 8,700 HeLa proteins.

Curated markers guided organellar assignments. Proteins split between compartments can yield mixed profiles and uncertain assignments. So a match is provisional. You would want a second marker that agrees, repeated fractionations, and an imaging check in intact cells. One more test asks whether an enzyme is enclosed by a membrane. In a 1951 report, de Duve's group found acid phosphatase acting less than expected in fresh fractions. More activity appeared once the particles were damaged. Picture the enzyme sealed in the lumen, its substrate outside and unable to cross.

Now add detergent to open the membranes. What happens to the activity? It rises, as long as detergent does not change the enzyme itself. The substrate can now reach it. Activity hidden behind a membrane is called latency.

Following these hidden enzymes across fractions led his group to propose the lysosome in 1955. De Duve later shared the 1974 Nobel Prize in Physiology or Medicine. The wall that holds a lumen's chemistry also hides what sits inside it. So place the protein first, by its whole profile and independent checks. Then ask what its compartment's chemistry does for it.

From the film

- Cell fractionation separates broken cells by repeated centrifuge spins; crude fractions overlap and are not assumed pure.
- Marker proteins of known home, such as histone H3, cathepsin D and pyruvate kinase, each spread across the fractions in their own shape.
- An unknown protein is assigned provisionally by comparing its whole profile with marker groups; split locations can yield mixed, uncertain profiles.
- Latency supports membrane enclosure: if detergent does not alter the enzyme itself, opening the membrane lets an outside substrate reach it.

## Which compartment holds a protein?

Now try the second film’s method with numbers: four fractions, F1 to F4, and each protein’s share in each. The numbers are made up for practice; the three markers are ones used in a real HeLa map.

| Protein | F1 | F2 | F3 | F4 |
| --- | --- | --- | --- | --- |
| Histone H3 (nucleus) | 0.80 | 0.10 | 0.05 | 0.05 |
| Cathepsin D (lysosome) | 0.05 | 0.20 | 0.60 | 0.15 |
| Pyruvate kinase (cytosol) | 0.05 | 0.05 | 0.10 | 0.80 |
| Unknown X | 0.06 | 0.18 | 0.61 | 0.15 |

**Predict.** Which marker does X travel with, and why is its F3 peak alone not enough to say?

> **Check your prediction.** Compare whole shapes, not one peak. Summed fraction-by-fraction differences: 0.04 against cathepsin D (0.01, 0.02, 0.01, 0.00), 1.48 against histone H3 and 1.30 against pyruvate kinase. X is provisionally lysosomal. Before concluding, run the second film’s confirmation checks (a second matching lysosomal marker, replicate fractionations, imaging in intact cells). Large studies leave some proteins unclassified because they live in more than one compartment ([experiments that distinguish](https://stemhop.com/lessons/experiments-that-distinguish/)).

### Design problem

You suspect that a protein lives in the lysosome lumen and needs low pH to work. Design experiments to test both parts.

> **One way to do it.** Confirm the environment with a lysosome-targeted pH reporter, calibrated in the cells with ionophores.
>
> Place the protein: compare its fractionation profile with at least two lysosomal markers, such as cathepsin D, and with markers of nearby compartments. Test **latency**, the second film’s detergent test (figure below), using an added substrate that cannot cross the membrane, and check separately that detergent does not change the protein’s activity by itself. Imaging shows the protein is at lysosomes, not inside them; on isolated lysosomes, a protease added outside reaches a lumenal protein only once detergent opens the membrane (protease protection).
>
> *Figure (AI-generated illustration).* Latency as a test of location. An enzyme sealed inside a lumen cannot act on a substrate outside; when detergent opens the membranes its activity rises. Image: two lysosomes side by side. On the left the membrane is intact and external substrate cannot reach the enzyme inside; on the right the membranes are opened with detergent and the substrate reaches the enzyme, producing product.
>
> Test the pH requirement: add bafilomycin A1 and follow lysosomal pH and the protein’s activity, checking that the protein still reaches lysosomes (its lysosomal-fraction amount is unchanged). In fly cells bafilomycin also inhibits SERCA, so repeat with a second way of raising lysosomal pH, such as depleting a V-ATPase subunit. Activity that falls as pH rises is a correlation; the purified protein’s activity across a pH range in vitro, and a rescue (restoring activity by restoring acidity), argue for cause.

## Going deeper

### Redox: a level of a different kind

The ER lumen is oxidizing, which lets disulfide bonds form, yet near neutral. Redox describes electrons, not protons, and is kept by ongoing reactions rather than a pump against a leak. In cultured CHO cells, a redox reporter called CY-RL7 was about 88% oxidized in the ER lumen and fully reduced in the cytosol. Redox also depends on which chemical couple you measure. In budding yeast, a glutathione-coupled reporter estimated the cytosol at about −306 mV and the matrix at about −301 mV, so the matrix pool was strongly reducing even though mitochondria make reactive oxygen species; the intermembrane-space pool exchanged with the cytosol through porins, but no appreciable exchange with the matrix was detected. In mammalian cultured cells, the redox state of the peroxisome depended strongly on growth conditions. No reliable peroxisomal pH is given here, so none is stated.

### When the pump slows as the gradient grows

The toy model holds the push fixed and ignores membrane voltage. A real V-ATPase moves fewer protons as the electrochemical gradient it works against grows, so a tenfold change in the pump’s capacity, or in the leak, need not shift the pH by a full unit. The direction of each change still follows the balance; the card’s exact numbers do not.

### Calcium that rides on another pump’s gradient

A pump that sets one gradient need not set another. In one HEK293 assay, the lysosome’s calcium store refilled after release even with the V-ATPase blocked, but failed to refill when ER calcium was depleted or chelated. That holds for that cell line and assay, and the transporter that takes calcium up was not identified. The lysosome is also a platform for nutrient signals ([mTOR and AMPK](https://stemhop.com/lessons/mtor-and-ampk/)).

### Who proposed it, and where on the bacterial tree

Konstantin Mereschkowski proposed a bacterial origin for plastids early in the twentieth century; in 1967 Lynn Margulis, writing as Lynn Sagan, made the case for both mitochondria and plastids (her spirochete origin for flagella has not been supported).

A 2022 analysis of 108 mitochondrial proteins, using a model that allows for changes in amino-acid composition across sites and branches, favoured mitochondria as sister to the Alphaproteobacteria, excluding two related lineages (MarineProteo1 and Magnetococcia), rather than inside any living group. Other analyses have placed mitochondria inside the Alphaproteobacteria, near the Rickettsiales, or deeper still.

For plastids, the closest cultured relative in 2017 was *Gloeomargarita lithophora*, a cousin of the plastid line, not its ancestor. Peroxisomes, by contrast with mitochondria and plastids, have no genome; they share fatty acid breakdown with mitochondria ([fatty acid degradation](https://stemhop.com/lessons/fatty-acid-degradation/)).

---

From STEMhop (https://stemhop.com), free lessons by Christopher Deppmann. Lesson text © the authors. Practice questions: https://stemhop.com/lessons/organelles-as-environments/
