# Ion Channels as Receptors

> How does a cell answer a signal in a thousandth of a second? This lesson treats the ion channel as a receptor whose output is a flow of ions and a change of voltage. You will be able to say which way an ion moves through an open channel, how a pore picks potassium over sodium, what opens a gate, and what a toxin or a drug does to it.

Course: Cell Signaling (Channels, the nucleus, and life or death). Level: advanced university and graduate. About 16 minutes.
Lesson page (link this one when citing): https://stemhop.com/lessons/ion-channels-as-receptors/

Builds on: A Field Guide to Receptors · Calcium: The Messenger Kept at Arm's Length · Sensing the World: Vision, Smell, Nitric Oxide and cGMP

## What you'll learn

- Explain how a channel turns a signal into a flow of ions and a change of voltage in about a millisecond, and predict which way an ion moves from its gradient and the membrane voltage.
- Explain how the selectivity filter of a potassium channel passes potassium and keeps out the smaller sodium ion.
- Describe three ways to open a gate (a ligand, a voltage, a stimulus such as heat) and name the channels from earlier lessons that are opened from inside the cell.
- Explain the NMDA receptor as a channel that needs two things at once, and say what tetrodotoxin and ketamine each do to a channel.

**One open ion channel lets about ten million ions cross a membrane every second. What can a cell do with a receptor like that?**

Most receptors in this course hand their message to something else, such as a G protein or a kinase. A channel hands it to nothing. The signal opens a hole, ions pour through, and the voltage across the membrane changes in about a millisecond. So what decides which way the ions go, how does a hole tell one ion from another, and what opens the gate?

## The idea: the signal opens a hole and the gradient does the rest

The first point is that there are lots of ion channels and that they are in every cell type, well beyond neurons. You have met two far from any nerve already: Orai in the T cell and the inositol trisphosphate (IP3) receptor on the calcium store.

Two kinds of protein move ions across a membrane (lesson `membrane-structure-function`). A transporter such as the Na+/K+ pump binds its ions and changes shape to carry them, uphill if it spends ATP, at a few hundred a second. A channel is a pore with a gate, and while the gate is open ions run downhill through it at around ten million a second. Pumps build the gradients slowly and channels spend them fast.

“Downhill” has two parts, and the phrase to remember is “Electro-chemical gradient”. An ion is pushed by its difference in concentration and pulled by the voltage across the membrane, and the inside of a resting neuron sits near −70 mV (other cells differ). For each ion there is one voltage at which push and pull balance. That is its equilibrium potential, E, and the Nernst equation gives it:

> **E = (61.5 mV ÷ z) × log10 (concentration outside ÷ concentration inside), at 37 °C**

Here z is the charge of the ion. With typical concentrations, E is about −90 mV for K+, about +60 mV for Na+ and above +120 mV for Ca2+. An open channel drags the membrane voltage toward the E of the ion it passes (or, for a channel that passes several ions, toward a value between their E’s), so the direction of flow follows from one subtraction:

> **driving force = membrane voltage − E**

At −70 mV, sodium is 130 mV away from its E, so it rushes in and the cell depolarises, meaning that its voltage becomes less negative. Potassium is only 20 mV from its E, so it leaks out gently and pulls the voltage back down. Try the calculator: change the concentrations on the two sides and watch E move.

*Interactive on the lesson page:* Nernst — every ion's equilibrium potential

Very few ions need to cross to change the voltage, so the concentrations barely shift and nothing has to be made. The voltage is the message, and when the ion is calcium the ion is a messenger too (lesson `calcium-signaling`).

## One protein, watched opening and closing

How does anybody know what a single channel does? The current through one is a few picoamps, a few trillionths of an amp. In Göttingen, Erwin Neher and Bert Sakmann pressed the tip of a glass pipette against a frog muscle fibre and recorded the current through the small patch of membrane under it. The trace they published in 1976 sat at zero, stepped up to a fixed level and stepped back, as one acetylcholine-gated channel opened and shut.

The weak point was the seal between glass and membrane. Current that leaked around the rim reached the amplifier along with the signal and buried it in noise. By Neher’s account in his Nobel lecture, around 1980 they noticed by chance that slight suction on the pipette made the seal more than a hundred times tighter. Its resistance went from millions of ohms to billions, and single openings stood clear of the background. The method is the [patch clamp](https://stemhop.com/methods/patch-clamp/).

To a good approximation a channel is either shut or open, and a stronger signal raises the share of time it spends open.

At the junction of nerve and muscle, Bernard Katz and his colleagues had found in the 1950s that acetylcholine is released in packets of roughly constant size. Each packet opens many channels at once.

## How a pore passes potassium and keeps out the smaller sodium

**Film transcript: A Pore That Pays for Potassium**

### Film transcript: A Pore That Pays for Potassium

A potassium channel can pass up to about a hundred million potassium ions a second. Yet for every thousand potassium ions, fewer than one sodium ion gets through. Sodium is the smaller ion. Its radius is 0.95 Å, against 1.33 Å for potassium. So the pore cannot be a simple sieve. Think of it as a trade. In water, every ion wears a coat of water molecules, and stripping that coat costs energy. An ion will enter a narrow pore only if the pore pays the cost back. In 1998, Roderick MacKinnon's laboratory showed how, with the structure of KcsA, a potassium channel from a soil bacterium. Four identical subunits surround one pore. Near the outer end it narrows to a selectivity filter, 12 Å long, too tight for an ion to keep its water.

The filter is lined with carbonyl oxygen atoms from the protein's backbone, set in rings that surround a potassium ion much as the oxygens of water did. Potassium swaps water for protein and loses almost nothing. Sodium is too small to touch all the oxygens of a ring at once, and in the 1998 account the filter is held too stiffly to close in on it. For sodium, leaving water costs more than the filter repays, so it stays outside. Two potassium ions sit in the filter in single file, and the repulsion between them pushes one out as the next arrives. That is the answer for potassium channels; sodium and calcium channels build their filters differently.

A potassium channel can pass up to about a hundred million K+ ions a second, yet fewer than one Na+ gets through for every thousand K+. Sodium is the smaller ion, with a radius of 0.95 Å against 1.33 Å, so the pore cannot be a simple sieve.

Think of it as a trade. In water, a positive ion such as K+ or Na+ wears a coat of water molecules with their oxygen atoms turned toward it, and stripping that coat costs energy. An ion will enter a narrow pore only if the pore pays the cost back.

In 1998 Roderick MacKinnon’s laboratory showed how, with the structure of KcsA, a potassium channel from a soil bacterium. Four identical subunits surround one pore. Near the outer end it narrows to a selectivity filter 12 Å long, too tight for an ion to keep its water. The filter is lined with carbonyl oxygen atoms from the protein’s backbone, set in rings that surround a K+ ion much as the oxygens of water did. Potassium swaps water for protein and loses almost nothing. Sodium is too small to touch all the oxygens of a ring at once, and in the 1998 account the filter is held too stiffly to close in on it, so for Na+ leaving water costs more than the filter repays. Later work changed that picture. The filter flexes, and what favours K+ is the electrical character of its oxygens and the need for four sites in a row. Sodium can enter the filter and bind there, still partly wet, but it is not passed along the way potassium is.

The same structure explains the speed. K+ ions sit in the filter in single file, and the repulsion between them pushes one out as the next arrives. How many ions are in the filter at once, and whether water sits between them, is still argued. Sodium and calcium channels build their filters differently.

## Three keys for one gate: a ligand, a voltage, the outside world

The gate is what makes a channel a receptor, and gates answer to three kinds of key.

**A ligand from outside.** The acetylcholine receptor of muscle is the model (lesson `receptor-field-guide`): transmitter binds and the pore opens. Glutamate-gated channels let Na+ in and excite a neuron, while GABA-A receptors pass Cl− and, in most mature neurons, hold its voltage down. Remember that “Both ionotropic and metabotropic can use ion channels.” An ionotropic receptor is the channel. A metabotropic receptor is a G-protein-coupled receptor that reaches a channel through a messenger inside the cell. You know four channels opened from inside: the heart’s potassium channel by Gβγ (lesson `gpcrs-and-g-proteins`), the rod’s channel by cGMP (lesson `senses-and-cgmp`), and the inositol trisphosphate (IP3) receptor and Orai (lesson `calcium-signaling`).

**A voltage.** Voltage-gated channels read the membrane itself. The sodium, potassium and calcium channels of this kind each have four voltage sensors, and in each one a helix called S4 carries a positive charge at about every third position. A voltage across a membrane is an electric field, and a field pushes on charge. Depolarise the membrane and S4 shifts outward and pulls the gate open.

This drives the action potential, the nerve impulse. A small depolarisation opens some sodium channels, Na+ enters, the membrane depolarises further and more channels open. That positive feedback (lesson `signaling-circuits`) carries the voltage toward the E of sodium within about a millisecond. Then a loop on the inner side of each sodium channel shuts the pore (inactivation), while slower potassium channels open and bring the voltage back. Current carried in by sodium at one spot spreads and depolarises the next stretch of membrane, so the impulse travels along the axon, the nerve cell’s long fibre, and the inactivated channels behind it keep it from turning back.

**A stimulus from the world.** “How does the skin detect heat??” With a channel of the TRP family, which cells use for sensing their surroundings. Before you read its name, work out what it has to be.

*Figure (AI-generated illustration).* Three examples of channel gating: an extracellular transmitter opens a ligand-gated channel; depolarisation moves the four voltage sensors of a voltage-gated sodium channel; and heat opens a heat-sensitive TRP channel. In each example, the channel itself is the receptor. The inward arrows illustrate ion entry in these examples, not a universal direction of flow. Image: three schematic channels side by side in a membrane, each with an open gate. A transmitter binds outside the left channel; the middle example represents a voltage-gated sodium channel with four voltage sensors that move; heat opens the right channel. Arrows show ions entering in each example.

### Design problem

Design a detector for dangerous heat in a nerve ending in the skin. It must turn a temperature above about 43 °C into a nerve impulse within milliseconds. What kind of protein do you need, which ions flow and in which direction, and how does that small local change become an impulse that travels? Then explain why a chilli pepper feels hot.

> **One way to do it.** Milliseconds favour a direct route over a chain of enzymes, so make the detector itself a channel with a gate that heat opens. Let the pore pass cations of several kinds, calcium most readily. At a resting voltage near −70 mV, Na+ and Ca2+ are both far from their equilibrium potentials, so both flow in and the ending depolarises. That change is small and local and fades with distance, so put voltage-gated sodium channels in the membrane nearby. If the depolarisation reaches their threshold they open, and an action potential carries the message along the axon at full height.
>
> One real version, and one of the skin’s detectors of painful heat, is TRPV1, cloned in David Julius’s laboratory in 1997 by looking for the protein that answers to capsaicin, the hot molecule of chilli peppers. Capsaicin binds in a pocket in the membrane-spanning part of the channel and opens the gate that heat opens. The nerve sends the same impulses either way, and the brain reads them as burning heat. Your mouth is no hotter.

## A channel that needs two things at once, and what plugs a pore

The N-methyl-D-aspartate (NMDA) receptor is a glutamate-gated channel with a second lock, found at synapses, the junctions between nerve cells. At the resting voltage a magnesium ion from outside is drawn into the open pore and sticks there, so glutamate opens the gate and almost nothing flows. If the membrane is already depolarised, usually because AMPA-type glutamate receptors beside it have let Na+ in, the magnesium is driven out. The channel conducts strongly only when two things happen together: the cell before the synapse has released glutamate, and the cell after it is already active. (Glycine or D-serine must also be bound.) What enters is Ca2+ along with Na+, and calcium is a messenger (lesson `calcium-signaling`). From there a path runs to the nucleus and to memory, the subject of a later lesson.

*Figure (AI-generated illustration).* Strong NMDA receptor conduction needs glutamate bound and the cell depolarised, with glycine or D-serine also bound. At rest, extracellular Mg2+ blocks the open pore much of the time, so very little current flows (the X marks a near-complete block, not exactly zero). Depolarisation relieves the block, allowing strong Na+ and Ca2+ entry. Outside the cell is above the membrane in both views. Image: two schematic views of an NMDA receptor in a membrane, with the cell exterior above and interior below. At rest, glutamate is bound but a magnesium ion plugs the pore and the flow arrow is crossed out, representing a strong block with very little current. In the depolarised cell the magnesium has been driven out and sodium and calcium enter through the pore.

Receptors at a synapse are “Anchored in place by a bunch of different scaffolds.” At glutamate synapses the scaffold PSD-95 holds the tails of NMDA receptors with its PDZ domains (lesson `protein-interaction-modules`), which helps keep them opposite the site of glutamate release.

Because a channel is a hole, the simplest way to stop it is to plug it. “Pufferfish=[tetrodotoxin](https://stemhop.com/methods/pharmacological-perturbation/) (TTX).” Tetrodotoxin is a small molecule that lodges in the outer mouth of the voltage-gated sodium channels of nerve and skeletal muscle. Sodium cannot enter, no action potential starts, and the result is paralysis. A “UVa moment” belongs here: Edmund “Butch” Brodie of the University of Virginia studies newts that carry the toxin and the garter snakes that eat them. Resistant snakes have changed amino acids at the mouth of their sodium channel, so the toxin binds poorly.

Drugs plug pores as well. Ketamine, an anaesthetic that is also a drug of abuse, enters the open NMDA receptor channel and blocks it from within, and it also makes the channel open less often.

*Figure (AI-generated illustration).* Because a channel is a hole, it can be plugged. Tetrodotoxin lodges in the outer mouth of the voltage-gated sodium channel; ketamine enters the open NMDA receptor pore and blocks it from within. Image: on the left, a toxin blob lodged in the outer mouth of a sodium channel stops sodium entering; on the right, a drug blob sits inside the open pore of an NMDA receptor and blocks it.

Channels can also be borrowed as tools: “Hacking Trp Channels”. Güler and colleagues (2012) made mice that express transient receptor potential vanilloid 1 (TRPV1) in chosen neurons, so that a dose of capsaicin switches those neurons on.

---

From STEMhop (https://stemhop.com), free lessons by Christopher Deppmann. Lesson text © the authors. Practice questions: https://stemhop.com/lessons/ion-channels-as-receptors/
